Post Reply 
the list
Author Message
nathaninwa Offline
BrickSpeed Vendor
*****

Posts: 238
Joined: Aug 2011
Post: #1
the list
Thought I would get something started here. Just rough right now, will edit, update over the next week or so.

Sheetemetal intakes for 8v and 16v motors, and prototyping another 20v motor, plus custom ones for all the vert, special needs cars. Currently 675 shipped plus PP.

[Image: 0102001319.jpg]

[Image: IMG_20101218_161419.jpg]

Stainless headers for 8v and 16v motors. T3 or T4, open, twin scroll, single or dual wastgates. Priced between 575 and 650 shipped plus pp fees

[Image: IMG_20111006_191324.jpg]

[Image: IMG_20110807_204142.jpg]

16v timing belt hardpart kits.

960 throttle bodys to 8v and soon B21 manifolds. 75.00 shipped w/pp fees

[Image: IMG_20111018_180345.jpg]

Fuel rails for just about anything. I can do non fpr style along with one that bolts the stock volvo fpr to it.

7/9 vert motor mounts, working a 240 solution.

8.8 link brackets. 72.00 plus PP. This will include the bushings all brackets, exept the panhard at this point.

[Image: IMG_20111024_091259.jpg]

Vent guage holders.

Working on a 9 series custom dash panel

[Image: IMG_20110211_210001-1.jpg]

Billet clutch pedals for hydro cars. 100 shipped plus pp fees

[Image: IMG_20110625_184703.jpg]

3d cnc cut animals, and most anything 2d cnc cut with plasma or router.
(This post was last modified: 11-27-2011 03:44 PM by nathaninwa.)
11-22-2011 02:13 PM
Find all posts by this user Quote this message in a reply
badvlvo Offline
Always Because Racecar
****

Posts: 2,971
Joined: Aug 2010
Post: #2
RE: the list
Sooooooo I'm holding my breath for some pictures!

I know the meaning of life.
11-22-2011 02:16 PM
Find all posts by this user Quote this message in a reply
linuxman51 Offline
BrickSpeed Vendor
*****

Posts: 1,102
Joined: Aug 2011
Post: #3
RE: the list
sweet. need noodss...errr pics. might help to toss the est/avg/base price in there too.
11-22-2011 02:27 PM
Visit this user's website Find all posts by this user Quote this message in a reply
nathaninwa Offline
BrickSpeed Vendor
*****

Posts: 238
Joined: Aug 2011
Post: #4
RE: the list
(11-22-2011 02:16 PM)badvlvo Wrote:  Sooooooo I'm holding my breath for some pictures!

Hope your good! It won't be till I get home tonight at least!
11-22-2011 02:27 PM
Find all posts by this user Quote this message in a reply
badvlvo Offline
Always Because Racecar
****

Posts: 2,971
Joined: Aug 2010
Post: #5
RE: the list
Damn, I was turning blue. Guess I will have to wait.

I know the meaning of life.
11-22-2011 02:29 PM
Find all posts by this user Quote this message in a reply
nathaninwa Offline
BrickSpeed Vendor
*****

Posts: 238
Joined: Aug 2011
Post: #6
RE: the list
Ill get the pricing up to later. I'm kinda excited about all this! Thanks guys.
11-22-2011 02:41 PM
Find all posts by this user Quote this message in a reply
Magnum TE Offline
Senior Member
***

Posts: 388
Joined: Sep 2011
Post: #7
RE: the list
I need to start embezzling more funds from our household budget.
11-26-2011 03:32 PM
Find all posts by this user Quote this message in a reply
nathaninwa Offline
BrickSpeed Vendor
*****

Posts: 238
Joined: Aug 2011
Post: #8
RE: the list
(11-26-2011 03:32 PM)Magnum TE Wrote:  I need to start embezzling more funds from our household budget.

I like the way you think. I still need to get to this and add pics and prices. Just been hella busy.....and Im taking a small Holiday next week for a week that I cant talk about till April so. Been preparing for this for a while now.
11-26-2011 09:46 PM
Find all posts by this user Quote this message in a reply
Cameron Offline
Tustom User Citle
*****

Posts: 104
Joined: Nov 2011
Post: #9
RE: the list
You forgot bitchin catchcans and aluminum overflow tanks. I have the evidence to prove those exist in your product line Sleepy
11-27-2011 01:35 AM
Visit this user's website Find all posts by this user Quote this message in a reply
atom Offline
Member
**

Posts: 92
Joined: Sep 2011
Post: #10
RE: the list
(11-27-2011 01:35 AM)Cameron Wrote:  You forgot bitchin catchcans and aluminum overflow tanks. I have the evidence to prove those exist in your product line Sleepy

I'll need to see these.

Adam

[Image: adam-rollingsig-3.jpg]
11-27-2011 01:50 AM
Find all posts by this user Quote this message in a reply
timetrialman59 Offline
Junior Member
*

Posts: 37
Joined: Aug 2010
Post: #11
RE: the list
Nathan I'll take a Clutch pedal, send me your Paypal again, thanks tj
12-01-2011 01:58 AM
Find all posts by this user Quote this message in a reply
badvlvo Offline
Always Because Racecar
****

Posts: 2,971
Joined: Aug 2010
Post: #12
RE: the list
Nice work Nathan!

Any interest in a diff cover for a Watts Link in the rear? I think SAM sells one but I don't bork so it's hard to tell.

I know the meaning of life.
12-01-2011 03:55 PM
Find all posts by this user Quote this message in a reply
Orie Offline
Parked in the garage
****

Posts: 1,741
Joined: Aug 2010
Post: #13
RE: the list
(12-01-2011 03:55 PM)badvlvo Wrote:  Nice work Nathan!

Any interest in a diff cover for a Watts Link in the rear? I think SAM sells one but I don't bork so it's hard to tell.

Oooh, that's an interesting idea. Smile
12-01-2011 06:19 PM
Find all posts by this user Quote this message in a reply
badvlvo Offline
Always Because Racecar
****

Posts: 2,971
Joined: Aug 2010
Post: #14
RE: the list
Yeah, it would be nice. I have a couple things up my sleeve here that I want to build for the 240's, but I don't have the time to build it all.

I know the meaning of life.
12-01-2011 06:33 PM
Find all posts by this user Quote this message in a reply
nathaninwa Offline
BrickSpeed Vendor
*****

Posts: 238
Joined: Aug 2011
Post: #15
RE: the list
Im sure building a heavier cover is doable, just like the other fabricated units out there. i either need to pull mine off in a few months when I get the car in the garage or have someone send me one so i can CAD the bolt pattern and see how much of a bump it needs.
12-01-2011 08:58 PM
Find all posts by this user Quote this message in a reply
nathaninwa Offline
BrickSpeed Vendor
*****

Posts: 238
Joined: Aug 2011
Post: #16
RE: the list
Im sure building a heavier cover is doable, just like the other fabricated units out there. i either need to pull mine off in a few months when I get the car in the garage or have someone send me one so i can CAD the bolt pattern and see how much of a bump it needs.
12-01-2011 08:58 PM
Find all posts by this user Quote this message in a reply
nathaninwa Offline
BrickSpeed Vendor
*****

Posts: 238
Joined: Aug 2011
Post: #17
RE: the list
I seem to have a double post problem......it happens alot, and I just delete the one.
12-01-2011 08:58 PM
Find all posts by this user Quote this message in a reply
badvlvo Offline
Always Because Racecar
****

Posts: 2,971
Joined: Aug 2010
Post: #18
RE: the list
I'm sure I could send you one.
I am getting more tempted every day to register my car as a 75 so I can run your engine stuff in CA without hassle.

I know the meaning of life.
(This post was last modified: 12-02-2011 08:10 AM by badvlvo.)
12-02-2011 08:09 AM
Find all posts by this user Quote this message in a reply
Magnum TE Offline
Senior Member
***

Posts: 388
Joined: Sep 2011
Post: #19
RE: the list
Might be in the works, but are you going to have your weld on logos available in a size that will weld onto your high top strut mounts?

Or a decal of your logo?

got to represent ya know.
04-24-2012 10:20 AM
Find all posts by this user Quote this message in a reply
harribert Offline
Now with moar Honda.
***

Posts: 269
Joined: Apr 2011
Post: #20
RE: the list
Let me know when you plan on selling stuff again. Tempted to purchase a 3" TB adapter.

Harald

Uberhoopt; '91 244 -- GONE
Honda Fit (to be nicknamed) '11

Quote:Originally Posted by Inc3pt
You talk so much **** it's amazing
Carry on.

Quote:Originally Posted by Quin
when harald's telling you not to be a bitch, you know you're being a bitch
04-24-2012 02:28 PM
Find all posts by this user Quote this message in a reply
nathaninwa Offline
BrickSpeed Vendor
*****

Posts: 238
Joined: Aug 2011
Post: #21
RE: the list
It'll be soon when I'm back up and tinkering. Ill check the fitment of my weldons tonight and Adam did send some stickers!
04-24-2012 05:23 PM
Find all posts by this user Quote this message in a reply
scottyd Offline
Posting Freak
****

Posts: 2,630
Joined: Aug 2010
Post: #22
RE: the list
Is that billet pedal for 2s or 7s/9s

'97 GMC K2500 Suburban 6.5TD - FailBus
'84 245GLT - FailWagon
'92 245DL - The iFixit.com Lemon
'95 850T5R - ButterCup


Cheap Camber Plates!
04-25-2012 07:24 PM
Visit this user's website Find all posts by this user Quote this message in a reply
Magnum TE Offline
Senior Member
***

Posts: 388
Joined: Sep 2011
Post: #23
RE: the list
looks like a 7/9xx pedal to me
04-25-2012 11:12 PM
Find all posts by this user Quote this message in a reply
scottyd Offline
Posting Freak
****

Posts: 2,630
Joined: Aug 2010
Post: #24
RE: the list
(04-25-2012 11:12 PM)Magnum TE Wrote:  looks like a 7/9xx pedal to me

I know Sad

'97 GMC K2500 Suburban 6.5TD - FailBus
'84 245GLT - FailWagon
'92 245DL - The iFixit.com Lemon
'95 850T5R - ButterCup


Cheap Camber Plates!
04-26-2012 12:25 AM
Visit this user's website Find all posts by this user Quote this message in a reply
Magnum TE Offline
Senior Member
***

Posts: 388
Joined: Sep 2011
Post: #25
RE: the list
oh for the first time in history there's a 7/9xx only part that you can't get for a 240, and you're grumpy... feel the wrath of the neglected grandpa series!
04-26-2012 05:33 AM
Find all posts by this user Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)