Post Reply 
Pre Dyno competition
Author Message
nathaninwa Offline
BrickSpeed Vendor
*****

Posts: 238
Joined: Aug 2011
Post: #1
Pre Dyno competition
A little while back I mentioned something in my build thread. Heres the official post. Friday the 18th Im headed to the dyno to tune on Gasoline. Im getting some NIW tshirts made up with the kickass logo that Adam came up, and whoever is closest to the WHP without going over Ill send a Tshirt too. To keep things fair, the boost level will be at 25psi. If I dyno with more pressure great, but the competition will be closest whp without going over at 25psi (give or take a psi). Dyno will be done on a DynoJet, and your entry needs to be in this thread.

One vote per memeber


(Ill do another one of these when I do E85 as well)
(This post was last modified: 05-14-2012 01:02 AM by nathaninwa.)
05-14-2012 12:50 AM
Find all posts by this user Quote this message in a reply
Magnum TE Offline
Senior Member
***

Posts: 388
Joined: Sep 2011
Post: #2
RE: Pre Dyno competition
One dollar, Bob.
05-14-2012 01:23 AM
Find all posts by this user Quote this message in a reply
Magnum TE Offline
Senior Member
***

Posts: 388
Joined: Sep 2011
Post: #3
RE: Pre Dyno competition
Ok I'll start it off. I'm assuming this pull will be after you completed tuning.

Hate me if you want to, and I hope you blow my numbers out of the water!

583hp
490ft/lb

check for edits
05-14-2012 01:36 AM
Find all posts by this user Quote this message in a reply
Coupe' de Tat Offline
bourbon the other foodgroup
****

Posts: 6,976
Joined: Aug 2010
Post: #4
RE: Pre Dyno competition
505hp
05-14-2012 08:54 AM
Find all posts by this user Quote this message in a reply
gsellstr Offline
Vintage anti-ricer
****

Posts: 2,501
Joined: Jan 2011
Post: #5
RE: Pre Dyno competition
649rwhp, 592rwtq

74 144E, http://forums.turbobricks.com/showthread.php?t=224983
90 745T, GT2871R @ 18psi on E85, MS2V3, bunch of other goodies. 13.50 @ 100.71, traction-limited.
If you need Superpro bushings for ANY vehicle, PM me for price and availability!
(This post was last modified: 05-14-2012 02:26 PM by gsellstr.)
05-14-2012 10:14 AM
Find all posts by this user Quote this message in a reply
KLR142 Offline
Junior Member
*

Posts: 26
Joined: Apr 2011
Post: #6
RE: Pre Dyno competition
We're talking WHP here peoples, none of this HP business! Haha.

Nathan, what has changed, engine wise, since the last time you dynoed? In a nutshell, if possible?
05-14-2012 02:14 PM
Visit this user's website Find all posts by this user Quote this message in a reply
gsellstr Offline
Vintage anti-ricer
****

Posts: 2,501
Joined: Jan 2011
Post: #7
RE: Pre Dyno competition
Happy you little whiner?? Jeez.....

:-P

74 144E, http://forums.turbobricks.com/showthread.php?t=224983
90 745T, GT2871R @ 18psi on E85, MS2V3, bunch of other goodies. 13.50 @ 100.71, traction-limited.
If you need Superpro bushings for ANY vehicle, PM me for price and availability!
05-14-2012 02:27 PM
Find all posts by this user Quote this message in a reply
nathaninwa Offline
BrickSpeed Vendor
*****

Posts: 238
Joined: Aug 2011
Post: #8
RE: Pre Dyno competition
(05-14-2012 02:14 PM)KLR142 Wrote:  We're talking WHP here peoples, none of this HP business! Haha.

Nathan, what has changed, engine wise, since the last time you dynoed? In a nutshell, if possible?

First to ask.
8.8 with 4.30 gearset.
2.66 T56 gear box
Motor balanced, smaller intake with better airhorns, 960tb, new intercooler, twinscroll header, .84 T4 Billet 6262 turbo, electric waterpump. Still running water/meth. Head is unchanged except new Volvo lifters.
05-14-2012 04:22 PM
Find all posts by this user Quote this message in a reply
Gross Polluter Offline
2JZ? No shit
***

Posts: 633
Joined: May 2011
Post: #9
RE: Pre Dyno competition
520whp, SAE correcton, 91 octane pump gasoline (since you didn't specify in your original post what type of gasoline you're running.)

EDIT: 545whp if you post another uncorrected dyno chart.

68 Rustang - MS'd 351C
88 245 - 2JZGTE VVTi powered, MS3X/MSGPIO controlled
98 XJ - Stock(ish)
(This post was last modified: 05-14-2012 08:46 PM by Gross Polluter.)
05-14-2012 06:04 PM
Find all posts by this user Quote this message in a reply
nathaninwa Offline
BrickSpeed Vendor
*****

Posts: 238
Joined: Aug 2011
Post: #10
RE: Pre Dyno competition
Yea, thats all we have up here. Itll be 91 pump from Shell. Ill post uncorrected for the power I actually put down at the time. But Ill get the corrected too.
05-14-2012 09:39 PM
Find all posts by this user Quote this message in a reply
nathaninwa Offline
BrickSpeed Vendor
*****

Posts: 238
Joined: Aug 2011
Post: #11
RE: Pre Dyno competition
Yea, thats all we have up here. Itll be 91 pump from Shell. Ill post uncorrected for the power I actually put down at the time. But Ill get the corrected too.
05-14-2012 09:39 PM
Find all posts by this user Quote this message in a reply
Gross Polluter Offline
2JZ? No shit
***

Posts: 633
Joined: May 2011
Post: #12
RE: Pre Dyno competition
I'll leave my comments on correction factors out of this, but those are my numbers based on the correction factor used at the time.

BTW... Racegas is still gasoline ;-)

68 Rustang - MS'd 351C
88 245 - 2JZGTE VVTi powered, MS3X/MSGPIO controlled
98 XJ - Stock(ish)
(This post was last modified: 05-14-2012 11:06 PM by Gross Polluter.)
05-14-2012 11:00 PM
Find all posts by this user Quote this message in a reply
volvoDouche69 Offline
Resident Corvette Fanatic
*****

Posts: 747
Joined: Jan 2011
Post: #13
RE: Pre Dyno competition
whats your compression ratio?
05-15-2012 09:21 PM
Find all posts by this user Quote this message in a reply
nathaninwa Offline
BrickSpeed Vendor
*****

Posts: 238
Joined: Aug 2011
Post: #14
RE: Pre Dyno competition
Its rsi internals, static is around 8.7-1. I cranked pre fireup at 160psi. Haven't checked post break in yet.
05-16-2012 07:34 PM
Find all posts by this user Quote this message in a reply
scottyd Offline
Posting Freak
****

Posts: 2,630
Joined: Aug 2010
Post: #15
RE: Pre Dyno competition
When does this thing get on le dyno?

'97 GMC K2500 Suburban 6.5TD - FailBus
'84 245GLT - FailWagon
'92 245DL - The iFixit.com Lemon
'95 850T5R - ButterCup


Cheap Camber Plates!
05-17-2012 02:29 PM
Visit this user's website Find all posts by this user Quote this message in a reply
nathaninwa Offline
BrickSpeed Vendor
*****

Posts: 238
Joined: Aug 2011
Post: #16
RE: Pre Dyno competition
Friday, about 430.
05-17-2012 08:50 PM
Find all posts by this user Quote this message in a reply
WindowsBreakerG4 Offline
Cookies Required
******

Posts: 3,399
Joined: Aug 2010
Post: #17
RE: Pre Dyno competition
You going to the bbq?

Volvo Documents, a growing collection

Karl Buchka Wrote:Matching gasoline is the new matching numbers.

MIKEHOWELLS! Wrote:I think the underlying cause of this is allowing too many N/A users on the board.
05-17-2012 10:23 PM
Visit this user's website Find all posts by this user Quote this message in a reply
nathaninwa Offline
BrickSpeed Vendor
*****

Posts: 238
Joined: Aug 2011
Post: #18
RE: Pre Dyno competition
Yes, right after the Dyno Ill be at the BBQ, this guy will be hungry from all the jumping up and down at English Racing.
05-17-2012 11:51 PM
Find all posts by this user Quote this message in a reply
harribert Offline
Now with moar Honda.
***

Posts: 269
Joined: Apr 2011
Post: #19
RE: Pre Dyno competition
(05-17-2012 11:51 PM)nathaninwa Wrote:  Yes, right after the Dyno Ill be at the BBQ, this guy will be hungry from all the jumping up and down at English Racing.

Mind if I crash the English party?

Harald

Uberhoopt; '91 244 -- GONE
Honda Fit (to be nicknamed) '11

Quote:Originally Posted by Inc3pt
You talk so much **** it's amazing
Carry on.

Quote:Originally Posted by Quin
when harald's telling you not to be a bitch, you know you're being a bitch
05-18-2012 04:09 AM
Find all posts by this user Quote this message in a reply
Magnum TE Offline
Senior Member
***

Posts: 388
Joined: Sep 2011
Post: #20
RE: Pre Dyno competition
I'm holding my breath.
05-18-2012 03:43 PM
Find all posts by this user Quote this message in a reply
nathaninwa Offline
BrickSpeed Vendor
*****

Posts: 238
Joined: Aug 2011
Post: #21
RE: Pre Dyno competition
At the dyno, post for time and edit reasons. Comp is over, results later.
05-18-2012 07:58 PM
Find all posts by this user Quote this message in a reply
Magnum TE Offline
Senior Member
***

Posts: 388
Joined: Sep 2011
Post: #22
RE: Pre Dyno competition
I can almost feel the pah! from here
05-18-2012 08:30 PM
Find all posts by this user Quote this message in a reply
Magnum TE Offline
Senior Member
***

Posts: 388
Joined: Sep 2011
Post: #23
RE: Pre Dyno competition
ZOMG suspense is killing me.
05-18-2012 11:13 PM
Find all posts by this user Quote this message in a reply
nathaninwa Offline
BrickSpeed Vendor
*****

Posts: 238
Joined: Aug 2011
Post: #24
RE: Pre Dyno competition
516whp. We had wheel spin from the Federal tires I got. Winner is on TB.
05-19-2012 12:34 AM
Find all posts by this user Quote this message in a reply
Coupe' de Tat Offline
bourbon the other foodgroup
****

Posts: 6,976
Joined: Aug 2010
Post: #25
RE: Pre Dyno competition
(05-19-2012 12:34 AM)nathaninwa Wrote:  516whp. We had wheel spin from the Federal tires I got. Winner is on TB.

wait, wtf, so you're not giving one here at Brickspeed?Userarmscrossed

that's ok, you probably don't have a shirt large enough for me anyway

teebeezy =/= brickspeed edit
(This post was last modified: 05-19-2012 10:11 AM by Coupe' de Tat.)
05-19-2012 08:06 AM
Find all posts by this user Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)